Compañeros ya se puede dar unlock al S102DL con bit 5 (Android 10) con z3x, igual sigan seleccionando el modelo A102U1 les dejo el log

Operation: Unlock
Selected model: SM-A102U1
Software version: 41.2

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-S102DL
Android version: 10
PDA version: S102DLUDU5BTE7
CSC version: S102DLTFN5BTE7
Phone version: S102DLUDU5BTE7
Product code: SM-S102DZKATFV
CSC country code: USA
CSC sales code: TFV
Phone SN: XXXXXXXX
IMEI: XXXXXXXXXXXX
HW version: REV1.0
RF cal date: 20190927
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2020-06-01
Boot Warranty bit: 0
SIM State: LOADED
Incorrect model selected
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Waiting ADB device... OK
Incorrect model selected
Searching Samsung diag port... detected COM201
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Unlocking... OK
Unlock done
Done with Samsung Tool PRO v.41.2

Señal, datos, etc todo ok full??

Buenas tardes Colegas, el método antes mencionado lo confirmo, salen al 100%. En mi caso fue el BIT5 Revisión de seguridad Mayo 2020, no fue problemático, todo que funcionando de forma excelente. Les dejo una foto con el Registro...

Saludos y muchas gracias por el aporte...

Binario 6 para este modelo lo han hecho??????

si funciona probe uno con seguridad diciembre 2020 bit 7 y lo saco, solo activa depuracion. no lo pongas en dm+acm+adb dejalo en mtp+adb y le das unlock

UNLOCK INSTRUCTIONS:
Phones locked by 'T-Mobile'(TMB, TMK), 'Verizon'(VZW)
are not supported for unlocking!

Unlocking using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock via server DIAG Oct 2019' button or press 'Unlock SPR via Server NEW' button,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Unlock via Server DIAG May 2020
Selected model: SM-A102U1
Software version: 42.1

Checking Login and Password... OK
Ballance: 17 crd.
You have 17 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-S102DL
Android version: 10
PDA version: S102DLUDS7BTK1
CSC version: S102DLTFN7BTK1
Phone version: S102DLUDS7BTK1
Product code: SM-S102DZKATFV
CSC country code: USA
CSC sales code: TFV
Carrier ID: TFN
Phone SN: RF8N322WK8M
IMEI: 357855108564051
HW version: REV1.0
RF cal date: 20200323
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2020-12-01
Boot Warranty bit: 0
SIM State: ABSENT
Incorrect model selected
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Waiting ADB device... OK
Incorrect model selected
Searching Samsung diag port... detected COM7
Checking diag port... OK
Searching Samsung modem... detected COM8
Searching server... OK
Checking server answer... modem required
There is no information about this firmware on the server.

and try other method also failed

UNLOCK INSTRUCTIONS:
Phones locked by 'T-Mobile'(TMB, TMK), 'Verizon'(VZW)
are not supported for unlocking!

Unlocking using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock via server DIAG Oct 2019' button or press 'Unlock SPR via Server NEW' button,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Unlock via Server DIAG Jan 2021
Selected model: SM-A102U1
Software version: 42.1

Checking Login and Password... OK
Ballance: 17 crd.
You have 17 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-S102DL
Android version: 10
PDA version: S102DLUDS7BTK1
CSC version: S102DLTFN7BTK1
Phone version: S102DLUDS7BTK1
Product code: SM-S102DZKATFV
CSC country code: USA
CSC sales code: TFV
Carrier ID: TFN
Phone SN: RF8N322WK8M
IMEI: 357855108564051
HW version: REV1.0
RF cal date: 20200323
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2020-12-01
Boot Warranty bit: 0
SIM State: SIM_SERVICE_PROVIDER_LOCKED
Incorrect model selected
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Waiting ADB device... OK
Incorrect model selected
Searching Samsung diag port... detected COM7
Checking diag port... OK
Searching Samsung modem... detected COM8
Searching server... OK
Checking server answer... modem not supported
Searching server... OK
Checking available files... not found compatible file

Done with Samsung Tool PRO v.42.1

Se puede o aún no, el bit 7 con z3x ?

Yo tengo actualizado a Binario 8, alguna solución para estas actualizaciones de seguridad? U7 & U8? Gracias de ante-mano.

Tengo uno con binario 10, ya estaba liberado pero con esa nueva actualización solo aparece lte cdma, ya no sale opción gsm, alguna solución??

Usa el buscador, le está sucediendo a los actualizados a Android 11, aquì debajo tienes la solución

https://www.clangsm.com/forum/index.php?showtopic=557772

no me funciona , estoy probando con uno S102DL bit 7 seguridad diciembre 2020 y no funciona , siempre escojo el modelo A102U1 en Z3X

Alguien tiene idea del porque a mi me sale error, tengo meses intentando hacer este cacharro y nada mas no sale!

-cambie puerto
-cambie cable
-hice reflash
-factory reset
-actualice Z3X

nada me funciona!


Checking Login and Password... OK
Balance: 6 crd.
You have 6 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-S102DL
Android version: 10
PDA version: S102DLUDU5BTE7
CSC version: S102DLTFN5BTE7
Phone version: S102DLUDU5BTE7
Product code: SM-S102DZKATFV
CSC country code: USA
CSC sales code: TFV
Carrier ID: TFN
Phone SN: RF8N92YP2ML
IMEI: 3xxxxxxxxxxxxxxxxx
HW version: REV1.0
RF cal date: 20200924
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2020-06-01
Boot Warranty bit: 0
SIM State: SIM_SERVICE_PROVIDER_LOCKED
Incorrect model selected
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Waiting ADB device... OK
Incorrect model selected
Searching Samsung diag port... detected COM134
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... error (9.1 3 3)
Reboot phone and try again.
Check ADB drivers, USB cable. Don't use USB Hubs
If this repeated then reflash phone and make factory reset.

Done with Samsung Tool PRO v.44.2 [SM-A102U1,Unlock via Server DIAG May 2020]

Me pasaba igual, la solucion muy simple, la leí mas arriba, *#0808#, cambias a adb+mtp y en vez de darle ok, le das reset, esperas a que se inicie y nuevamente le das unlock y te sale de una.

Hola colegas, alguien sabe si hay soporte para bit 12?