Frp Logic L4t, (Aporte) |
 |
|
Bienvenido, invitado ( Identificarse | Registrarse )
  |
Frp Logic L4t, (Aporte) |
 May 19 2021, 12:10 PM
Publicado:
#1
|
|
|
Miembro del Clan  Grupo: Miembros Mensajes: 29 Agradecimientos: 37 Registrado: 26-March 15 Miembro No.: 701,950  |
Algo simple con nck modulo spreadtrum
seleccionar procesador 9832e y conectar con volumen (-) aca dejo el log. Phone Storage: EMMC EXE: NckBox Spreadtrum Module 1.7 SELECTED: SC9832E_EMMC ACTION: Erase FRP Start Detect phone. Phone must be off with battery inside. Long press "VOL -" key while inserting usb cable. Keep key untill boot complete. Detected: SPRD U2S Diag (COM30) Sending loader, keep boot key untill loader start. Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. New flash metod detected. UID: TA0W83_23_11_28 [readed: 8 expected: 8200 ] Read Error: 7E00840000FF7B7E0038 Removing frp, wait... Format OK. Wait untill phone restart. Log saved: C:\Users\HELIOS\Documents\spreadtrum_module\Saved_Logs\_erase_frp_10.txt Total Time: 00:00:20 Done. Mensaje modificado por beny753 el May 19 2021, 12:13 PM |
 |
 
|
A continuacion 5 usuario(s) le Agradece(n) a beny753 por su Colaboracion: Damazo Junior, LAB_SANTACRUZ, metalprofano, servicesam, TomasPerez | |
| Anunciante Autorizado |
May 19 2021, 12:10 PM
Publicado:
#
|
 Estas ofertas pudieran interesarte. |
|
|
|
|
|
May 7 2023, 10:28 AM
Publicado:
#2
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 78 Agradecimientos: 148 Registrado: 13-December 20 Miembro No.: 1,199,992 Pais: 
|
CITA(beny753 @ May 19 2021, 03:10 PM)  Algo simple con nck modulo spreadtrum seleccionar procesador 9832e y conectar con volumen (-) aca dejo el log. Phone Storage: EMMC EXE: NckBox Spreadtrum Module 1.7 SELECTED: SC9832E_EMMC ACTION: Erase FRP Start Detect phone. Phone must be off with battery inside. Long press "VOL -" key while inserting usb cable. Keep key untill boot complete. Detected: SPRD U2S Diag (COM30) Sending loader, keep boot key untill loader start. Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. New flash metod detected. UID: TA0W83_23_11_28 [readed: 8 expected: 8200 ] Read Error: 7E00840000FF7B7E0038 Removing frp, wait... Format OK. Wait untill phone restart. Log saved: C:\Users\HELIOS\Documents\spreadtrum_module\Saved_Logs\_erase_frp_10.txt Total Time: 00:00:20 Done. desbloqueo también realizado. ACTION: Direct Unlock Detecting phone, wait... Using connection mode 1 Detected: SCI USB2Serial (COM73) Platform Version: MOCORTM_20A_W21.15.3_Debug Project Version: sharklp BASE Version: 4G_MODEM_20A_W21.15.3 HW Version: sc9832e_modem 04-14-2021 17:43:35 Build number: sp9832e_1h10_gofu-user 11 RP1A.201005.001 49320 release-keys EMMC DDR SIZE :15.00 GB+2.00 GB UID: e7bef7f7f4cdf0c3fee211fe23bf455b864cb3aac335f0ce027b8afc60e2c873 IMEI 1: 355255170381363 IMEI 2: 867400020316620 IMEI 3: 867400020316638 IMEI 4: 867400020316646 BT: 000000000000 WIFI: 000000000000 Reading simlock backup, wait.... Saved to: C:\Users\Cell Center\Documents\spreadtrum_module\diag_nvram_backup\sp9832e_1h10_gofu-user_11_RP1A_201005_001_49320_release-keys_355255170381363__diag_simlock_nvram_backup.tar Simlock Status: SIMLOCK: ACTIVE NETWORK SUBNET: INACTIVE SP LOCK: INACTIVE CORPORATE: INACTIVE USER LOCK: INACTIVE [3]Simlock Type: 0 0 Sim 1 Unlock Code: 87083993 Sim 2 Unlock Code: 41023788 Warning, this is factory key, some opperators can modify factory key. Unlock is supported for this phone Writing simlock... Writing simlock ok Done. Exe version: NckBox Spreadtrum Module 2.1.8 Log saved: C:\Users\Cell Center\Documents\spreadtrum_module\Saved_Logs\sp9832e_1h10_gofu-user11RP1A_201005_00149320release-keys_355255170381363_diag_simlock_unlock.txt |
|
|
|
A continuacion 1 usuario(s) le Agradece(n) a abreum7491 por su Colaboracion: LAB_SANTACRUZ | |
|
|
|
Fecha y Hora actual: 22nd April 2026 - 09:53 PM |
