ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Logic B3 Piperito De Claro Unlock Aporte
chikinkiro
mensaje Nov 8 2018, 04:13 PM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 110
Agradecimientos: 143
Registrado: 15-May 15
Desde: republica dominicana
Miembro No.: 717,541
Pais:do


elejir mtk plataforma, le di desbloqueo directo luego conecte en cell apagado,
listo en 30 segundos

SigmaKey v.2.29.06
New version 2.29.10 is available on www.sigmakey.com. We strongly recommend to update SigmaKey!
Sigma dongle 2.29, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2018-11-08 17:09:05 ---------
SigmaKey 2.29.06 MTK: Liberación directa
Conecte el cable USB al teléfono apagado...
MediaTek USB Port (COM280), Proveedor:: MediaTek Inc., Versión de drivers:: 3.0.1504.0, Fecha: 21/1/2015, USB\VID_0E8D&PID_0003&REV_0100
Procesador Baseband:MT6261, HW Rev.: B.01, SW Rev.: 0.01
Número de serie: 72157126FDDFEBF7
Chequeando la memoria RAM del teléfono...4 Mb
Identificando la memoria flash...SPI, ID: 00EF7016-00000000
Tamaño de memoria flash: 4 Mb, tamaño del bloque: 4 Kb
Sistema de ficheros: 380 Kb @ 0039F000
Firmware: T05C_CLARO_NFLH_PCB01_gprs_MT6261_S00.LOGIC_CLARO_B3_V3_0_02032018
Hardware IMEI: No encontrado
Software IMEI: 35150809******
Zona de seguridad guardada en "C:\Users\chiki\Documents\SigmaKey\security backup884602284\351508092*****_T05C_CLARO_NFLH_PCB01_gprs_MT6261_S00_LOGIC_CLARO_B3_V3_0_02
32018.skb"
Liberando el teléfono...Hecho
Go to the top of the page
 
+Quote Post
A continuacion 14 usuario(s) le Agradece(n) a chikinkiro por su Colaboracion:
abel1988, Angel Arvelo, cenllabo, gersonf13, jonathanjvp, kukihrndz, Liriano5, luisito132, nay31, netizen, pukycasperlopez, reydis, sangyomg, sonyex
Anunciante Autorizado
mensaje Nov 8 2018, 04:13 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
elsandunguer0
mensaje Jun 4 2019, 07:26 AM
Publicado: #2

Miembro del Clan
*

Grupo: Miembros
Mensajes: 141
Agradecimientos: 120
Registrado: 14-June 12
Desde: Santiago De Los Caballeros
Miembro No.: 351,209
Pais:do


CITA(chikinkiro @ Nov 8 2018, 05:13 PM) *
elejir mtk plataforma, le di desbloqueo directo luego conecte en cell apagado,
listo en 30 segundos

SigmaKey v.2.29.06
New version 2.29.10 is available on www.sigmakey.com. We strongly recommend to update SigmaKey!
Sigma dongle 2.29, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2018-11-08 17:09:05 ---------
SigmaKey 2.29.06 MTK: Liberación directa
Conecte el cable USB al teléfono apagado...
MediaTek USB Port (COM280), Proveedor:: MediaTek Inc., Versión de drivers:: 3.0.1504.0, Fecha: 21/1/2015, USB\VID_0E8D&PID_0003&REV_0100
Procesador Baseband:MT6261, HW Rev.: B.01, SW Rev.: 0.01
Número de serie: 72157126FDDFEBF7
Chequeando la memoria RAM del teléfono...4 Mb
Identificando la memoria flash...SPI, ID: 00EF7016-00000000
Tamaño de memoria flash: 4 Mb, tamaño del bloque: 4 Kb
Sistema de ficheros: 380 Kb @ 0039F000
Firmware: T05C_CLARO_NFLH_PCB01_gprs_MT6261_S00.LOGIC_CLARO_B3_V3_0_02032018
Hardware IMEI: No encontrado
Software IMEI: 35150809******
Zona de seguridad guardada en "C:\Users\chiki\Documents\SigmaKey\security backup884602284\351508092*****_T05C_CLARO_NFLH_PCB01_gprs_MT6261_S00_LOGIC_CLARO_B3_V3_0_02
32018.skb"
Liberando el teléfono...Hecho

lo conecto apagado como dices y me detecta el puerto com, pero al final me tira el siguiente mensaje
Error opening serial port

lo he probado de diferentes formas y nada


--------------------
-=[[£L_§aNdUnGu£rO™]],, ¢ON LO§ Pod£®£§=--
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a elsandunguer0 por su Colaboracion:
pukycasperlopez
elsandunguer0
mensaje Jun 4 2019, 08:15 AM
Publicado: #3

Miembro del Clan
*

Grupo: Miembros
Mensajes: 141
Agradecimientos: 120
Registrado: 14-June 12
Desde: Santiago De Los Caballeros
Miembro No.: 351,209
Pais:do


CITA(elsandunguer0 @ Jun 4 2019, 08:26 AM) *
lo conecto apagado como dices y me detecta el puerto com, pero al final me tira el siguiente mensaje
Error opening serial port

lo he probado de diferentes formas y nada

Me funciono de la siguiente manera:
Fichero Adjunto  1.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 182.09k ) Número de descargas: 0

Fichero Adjunto  2.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 142.88k ) Número de descargas: 0


Mensaje modificado por LAB_SANTACRUZ el Dec 18 2020, 01:58 PM
Motivo de edición: suba las imagenes directas al servidor de clangsm, como archivos adjunto.


--------------------
-=[[£L_§aNdUnGu£rO™]],, ¢ON LO§ Pod£®£§=--
Go to the top of the page
 
+Quote Post
A continuacion 5 usuario(s) le Agradece(n) a elsandunguer0 por su Colaboracion:
alberit, elarabe01, fernandoperez05, pukycasperlopez, reydis
jonascoffe13
mensaje Jan 6 2020, 04:59 PM
Publicado: #4

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 359
Agradecimientos: 387
Registrado: 27-February 13
Desde: republica Dominicana
Miembro No.: 441,558
Pais:ad


CITA(elsandunguer0 @ Jun 4 2019, 07:15 AM) *


Ese equipo no puede ser MTK cuando instala driver Spreadtrum
Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a jonascoffe13 por su Colaboracion:
alberit, carhtorres
lma2212
mensaje Feb 29 2020, 10:37 AM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 217
Agradecimientos: 343
Registrado: 15-October 11
Desde: RD
Miembro No.: 265,254
Pais:do


CITA(jonascoffe13 @ Jan 6 2020, 05:59 PM) *
Ese equipo no puede ser MTK cuando instala driver Spreadtrum

hay dos verciones unos bienen mtk y siendo el mismo modelo
Go to the top of the page
 
+Quote Post
DANYEL CATPO
mensaje Dec 16 2020, 04:46 PM
Publicado: #6

Miembro del Clan
*

Grupo: Miembros
Mensajes: 41
Agradecimientos: 216
Registrado: 23-November 12
Desde: Perú
Miembro No.: 407,154



aqui el post del mismo modelo pero procesador spd https://www.clangsm.com/forum/index.php?showtopic=548851
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a DANYEL CATPO por su Colaboracion:
LAB_SANTACRUZ, yensythen
jeanfer
mensaje Mar 23 2021, 11:21 AM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 5
Agradecimientos: 6
Registrado: 26-May 16
Desde: USA
Miembro No.: 832,860
Pais:ar


CITA(chikinkiro @ Nov 8 2018, 05:13 PM) *
elejir mtk plataforma, le di desbloqueo directo luego conecte en cell apagado,
listo en 30 segundos

SigmaKey v.2.29.06
New version 2.29.10 is available on www.sigmakey.com. We strongly recommend to update SigmaKey!
Sigma dongle 2.29, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2018-11-08 17:09:05 ---------
SigmaKey 2.29.06 MTK: Liberación directa
Conecte el cable USB al teléfono apagado...
MediaTek USB Port (COM280), Proveedor:: MediaTek Inc., Versión de drivers:: 3.0.1504.0, Fecha: 21/1/2015, USB\VID_0E8D&PID_0003&REV_0100
Procesador Baseband:MT6261, HW Rev.: B.01, SW Rev.: 0.01
Número de serie: 72157126FDDFEBF7
Chequeando la memoria RAM del teléfono...4 Mb
Identificando la memoria flash...SPI, ID: 00EF7016-00000000
Tamaño de memoria flash: 4 Mb, tamaño del bloque: 4 Kb
Sistema de ficheros: 380 Kb @ 0039F000
Firmware: T05C_CLARO_NFLH_PCB01_gprs_MT6261_S00.LOGIC_CLARO_B3_V3_0_02032018
Hardware IMEI: No encontrado
Software IMEI: 35150809******
Zona de seguridad guardada en "C:\Users\chiki\Documents\SigmaKey\security backup884602284\351508092*****_T05C_CLARO_NFLH_PCB01_gprs_MT6261_S00_LOGIC_CLARO_B3_V3_0_02
32018.skb"
Liberando el teléfono...Hecho


SigmaKey v.2.40.01
New version 2.40.05 is available on www.sigmakey.com. We strongly recommend to update SigmaKey!
732799152 Sigma dongle 2.40, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
Pack 5: Not activated
--------- 2021-03-23 12:17:08 ---------
SigmaKey 2.40.01 MTK: Direct unlock
Plug the USB cable into the powered off phone...
MediaTek USB Port (COM15), Provider: MediaTek Inc., Driver ver.: 3.0.1504.0, Date: 1/21/2015, USB\VID_0E8D&PID_0003&REV_0100
Baseband Processor:MT6261, HW Rev. B.01, SW Rev. 0.01
Serial number: 90DC69F88316C0BE
Testing external RAM...4 Mb
Detecting flash...SPI, ID: 00EF7016-00000000
Flash size: 4 Mb, block size: 4 Kb
File system: 380 Kb @ 0039F000
Firmware: T05C_CLARO_NFLH_PCB01_gprs_MT6261_S00.LOGIC_CLARO_B3_V3_0_02032018
Hardware IMEI: Not found
Software IMEI: 351508093538046
Mounting system disk...#1
Security area saved to "C:\Users\JT TECHNOLOGY\OneDrive - Universidad Autonoma de Santo Domingo\Documentos\SigmaKey\security backup732799152\351508093538046_T05C_CLARO_NFLH_PCB01_gprs_MT6261_S00_LOGIC_CLARO_B3_V3_0_0
032018.skb"
Unlocking phone...Done


100% work, Solo tienen que tener los drivers bien instalado y conectar el celular apagado una ves que presionen Direct Unlock
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 usuario(s) está(n) leyendo este tema (1 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 21st April 2026 - 12:51 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +