ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

Unlock Y Frp Nix Shade
ficarpe
mensaje Nov 8 2017, 11:44 AM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 40
Agradecimientos: 68
Registrado: 12-October 10
Desde: GB
Miembro No.: 141,117
Pais:ad


1. Seleccionan SC773x emmc Android 7
2. Pestaña security luego SP unlock
2. conectan apagado presionando las teclas de volumen sin soltar hasta que termine el proceso.

Card found: S/N : 998319D7 , v0136
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 7.x]

Operation : SP Unlock [ v1.27 ]
Mode : DirectUnlock

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 76 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Checking Structure ...
SimLock state : Locked!
Unlocking ...
Unlock Done!

Elapsed: 00:00:34

Reconnect Power/Cable!

Para FRP el mismo proceso solo que en service clear frp

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 76 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x000000010B0F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:26

Reconnect Power/Cable

Mensaje modificado por ficarpe el Nov 8 2017, 11:50 AM
Go to the top of the page
 
+Quote Post
A continuacion 4 usuario(s) le Agradece(n) a ficarpe por su Colaboracion:
anhellhn, Dabrid, fridel, zumy
 
Start new topic
Respuestas (1 - 6)
Anunciante Autorizado
mensaje Nov 8 2017, 11:44 AM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
mauro1988
mensaje Feb 24 2018, 12:52 PM
Publicado: #2

Maestro del Clan
***

Grupo: Miembros
Mensajes: 974
Agradecimientos: 3166
Registrado: 11-February 09
Desde: GB
Miembro No.: 21,904
Pais:hn


aqui para comnpletar elprocesocon una imagen amigo

esla nueva vercion de este cell
Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 6 usuario(s) le Agradece(n) a mauro1988 por su Colaboracion:
dacel, Jose Bocanegra, microcellhn, orlando.hn, yordanoyuela, zumy
zumy
mensaje Apr 28 2018, 12:09 PM
Publicado: #3

Maestro del Clan
***

Grupo: Miembros
Mensajes: 1,364
Agradecimientos: 679
Registrado: 30-August 12
Desde: new york
Miembro No.: 379,238
Pais:hn


las nuevas versionesde sofware solo con lainfynity box yano trabaja la nck dongle


--------------------
[size="4"][/size]dongle sigma key nck key furios key
vygis box nck box gcpro key cycone box ufs saras box magma box inferno key z3x octopux box
Go to the top of the page
 
+Quote Post
zumy
mensaje May 31 2018, 10:52 AM
Publicado: #4

Maestro del Clan
***

Grupo: Miembros
Mensajes: 1,364
Agradecimientos: 679
Registrado: 30-August 12
Desde: new york
Miembro No.: 379,238
Pais:hn


solo infinity box me lo logro sacar
no se les olvide mantener precionado los boton volumen arri y abajo como mensiona el colega en todo el proceso

Mensaje modificado por zumy el May 31 2018, 10:53 AM
Fichero(s) Adjunto(s)
 


--------------------
[size="4"][/size]dongle sigma key nck key furios key
vygis box nck box gcpro key cycone box ufs saras box magma box inferno key z3x octopux box
Go to the top of the page
 
+Quote Post
raul7205
mensaje Jun 13 2018, 12:31 AM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 8
Agradecimientos: 3
Registrado: 4-June 10
Miembro No.: 108,151



CITA(ficarpe @ Nov 8 2017, 12:44 PM) *
1. Seleccionan SC773x emmc Android 7
2. Pestaña security luego SP unlock
2. conectan apagado presionando las teclas de volumen sin soltar hasta que termine el proceso.

Card found: S/N : 998319D7 , v0136
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 7.x]

Operation : SP Unlock [ v1.27 ]
Mode : DirectUnlock

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 76 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Checking Structure ...
SimLock state : Locked!
Unlocking ...
Unlock Done!

Elapsed: 00:00:34

Reconnect Power/Cable!

Para FRP el mismo proceso solo que en service clear frp

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 76 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x000000010B0F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!
Done!

Elapsed: 00:00:26

Reconnect Power/Cable



Y que drivers usaste y como los instalastes??? Me puedes iluminar con eso por favor?
Go to the top of the page
 
+Quote Post
ficarpe
mensaje Jun 14 2018, 05:29 PM
Publicado: #6

Miembro del Clan
*

Grupo: Miembros
Mensajes: 40
Agradecimientos: 68
Registrado: 12-October 10
Desde: GB
Miembro No.: 141,117
Pais:ad


CITA(raul7205 @ Jun 13 2018, 01:31 AM) *
Y que drivers usaste y como los instalastes??? Me puedes iluminar con eso por favor?


Son los drivers normales para spd amigo busca en el red....
Go to the top of the page
 
+Quote Post
isalopez1994
mensaje Aug 22 2018, 03:03 PM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 17
Agradecimientos: 49
Registrado: 30-April 17
Miembro No.: 948,100
Pais:ad


Unlock https://www.clangsm.com/forum/index.php?sho...p;#entry1886611
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a isalopez1994 por su Colaboracion:
alfredo27

Reply to this topicStart new topic
1 usuario(s) está(n) leyendo este tema (1 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 18th April 2026 - 04:33 PM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +