Este modelo lo pude hacer facilmente con la version LG de octopus 2.6.9 seleccionando el modelo M257

activando el puerto de test con *#546368#*153# y colocondolo en Enable

activar USB debug y darle unlock...se desbloquea bien, solo que al poner la Simcard de T-mobile se demora casi un minuto en entrar la senal, pe4o luego trabaja estable

Saludos

Welcome to Octoplus/Octopus Box LG Software version 2.6.9
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM895
Selected model: M160
Reading info...
Model ID: LG-M153
IMEI: 354064-08-253995-6
Android version: 6.0.1
Battery level: 52%
SW Version: M15310a
Trying to enable Diagnostics ports...
Found model LGM153AT: ÿh `s at port COM895
Unlocking...
Reading QCN...
Send SPC...OK
Reading Mobile Property...OK
Reading Feature Mask...OK
Reading Roaming List 0...OK
Reading NV_Numbered Items...OK
Reading NV_Numbered SIM1 Items...OK
Reading NV_Numbered SIM2 Items...OK
Reading NV Items...OK
Reading EFS...OK
Reading Provisioning Items...OK
Reading QCN done!
Backup saved to "M160_354064082539956_26-06-2017_12-36-12.qcn"
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Reading security area...OK
Backup saved to "M160_354064082539956_26-06-2017_12-42-01.SEC"
Writing security area...OK
Switching to Normal mode...
Trying to enable Diagnostics ports...Failed!
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Please perform the following steps:
1. Disconnect cable
2. Put phone into Normal mode manually
3. Press "Ok" button
Trying to enable Diagnostics ports...Failed!
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Diagnostics ports are enbled!
Switching to Serial Port...
Found model LGM153AT* ÿh ` at port COM895
Send SPC...OK
Writing QCN...
Writing NV_Numbered Items...OK
Writing NV_Numbered SIM1 Items...OK
Writing NV_Numbered SIM2 Items...OK
Writing QCN done!
Phone successfully unlocked!
Rebooting phone...
Performed by 2.6.9 Software version.
--------------------------------------------------------------------------------

Mensaje modificado por slaviansk el Jun 26 2017, 05:59 PM

Estube teniendo problema con los drivers a la hora de activar Enable no pasaba nada, así que lo que hice fue desactivar nuevamente la depuración y activarla y ahí me lo detecto de manera correcta Gracias por el aporte