Tengo un problema, tengo un lg 3d p920, ya eh intentado flashear pero al cargar segun el kdz y completar la actualizacion y encender el dispositivo vuelve a la misma configuracion que tenia antes de realizar la actualizacion, lo mismo pasa si desinstalo aplicaciones y cambio el idioma del celular, al reiniciar el dispositivo regresan todas las aplicaciones y regresa el idioma en el que estaba anteriormente, es como si una computadora estubiera instalado el deepfrezze que al reiniciarse queda tal y cual, alguna solucion? se los agradeceria.

Mensaje modificado por craven007 el Nov 29 2014, 12:13 PM

cuentas con alguna box lg, octopus, vygis, lgtool ?

tengo la octopus box, pero tampoco me da solucion.
pongo el log

Welcome to Octoplus/Octopus Box LG Software version 1.7.6
--------------------------------------------------------------------------------
Platform: LG Infineon
Connection mode: OMAP
Selected model: P720
Please, disconnect battery and connect P999 cable (with 910k
resistor).
Connecting...OK
Sending preloader...OK
Sending loader...OK
Opening "BOOTV21E_AP2.oct"...Failed!
File declared for different phone model!
--------------------------------------------------------------------------------
Platform: LG Infineon
Connection mode: OMAP
Selected model: P720h
Please, disconnect battery and connect P999 cable (with 910k
resistor).
Connecting...OK
Sending preloader...OK
Sending loader...OK
Opening "BOOTV21E_AP2.oct"...Failed!
File declared for different phone model!
--------------------------------------------------------------------------------
Platform: LG Infineon
Connection mode: OMAP
Selected model: P920
Please, disconnect battery and connect P999 cable (with 910k
resistor).
Connecting...OK
Sending preloader...OK
Sending loader...OK
Opening "BOOTV21E_AP2.oct"...OK
Initializing device...OK
Writing Firmware...
Connecting to application CPU...OK
Writing gpt1...OK
Writing x-loader...OK
Writing nv1...OK
Writing u-boot...OK
Writing kernel...OK
Writing recovery...OK
Writing system...OK
Repairing boot done.
Please, write any firmware from support.
--------------------------------------------------------------------------------
Platform: LG Infineon
Connection mode: OMAP
Selected model: P920
Opening "BOOTV21E_AP2.oct"...OK
Please, disconnect battery and connect P999 cable (with 910k
resistor).
Initializing device...OK
Writing Firmware...
Connecting to modem CPU...OK
Sending preloader...OK
Sending loader...OK
Initializing flash...OK
Writing psi.fls...OK
Writing slb.fls...OK
Writing AENEAS_FW.fls...OK
Writing L6260_SIC.fls...OK
Connecting to application CPU...OK
Writing gpt1...OK
Writing x-loader...OK
Writing nv1...OK
Writing u-boot...OK
Writing kernel...OK
Writing recovery...OK
Writing system...OK
Writing reserved...OK
Writing divxkey...OK
Writing misc...OK
Writing fat...OK
Writing firmware done!
Disconnected.
Please, reboot the phone manually.

Mensaje modificado por craven007 el Dec 2 2014, 11:44 AM