Hola
Soy nuevo en el mundo de la telefonia, y empiezo ahora. Tengo una cyclone reloaded box, y estoy loco con un Nokia N96 que he recivido con pantalla en blanco, logo NOKIA y se reinicia. He intentado varias opciones que he leido aqui en el foro y he conseguido poco.
el Telefono tiene el IMEI perdido y sale con ? y no hay manera de recuperarlo con AUTO RECOVERY IMEI, tambien se queda colgado con el self test en el 53%. Luego tengo que desconectar la box pues se queda colgada y no detecta nada.
Aqui les dejo un Read Info del telefono:

MCU Version V ICPR72_09w13.2
MCU Date 19-05-09
Product RM-247 (Nokia N96)
Manufacturer © Nokia
IMEI 12345610654321?
IMEI Spare 1A32541660452301
IMEI SV 1332541660452301F8000000
PPM 0n0i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003
CNT V 40.2009.25.xx PRD
PSN CHH409615
Product Code 0543721
Basic Product Code 0542934
PSD 0000000000000000
LPSN 0
APE SW 30.033
APE Variant 30.03330.033.008.130.033.098.1
APE Test ENOSW_4032_PR11.0835_003
APE HW 0
APE ADSP 0
RETU 15
TAHVO 22
AHNE 11
HW 0n0io0n0i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003
PCI o0n0i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003
UEM 0n0i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003
UPP 0n0i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003
RFIC 17141715
DSP MC_4032_ICPR72_09w13o0n0i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003¥V 40.2009.25.xx PRD
LCD 0n0W1083227i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003¥V 40.2009.25.xx PRD
BT 0n0i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003¥V 40.2009.25.xx PRD
ADSP Sw 0n0i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003
ADSP DevID 0n0i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003
ADSP RevID 0n0i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003
AEM 0n0i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003
Flip MCUSW 0n0i30.033j$30.03330.033.008.130.033.098.1rV 40.2009.25.xx PRDk ENOSW_4032_PR11.0835_003¥V 40.2009.25.xx PRD
Failed to read info -> Failed to read SP info

aqui uno del Analize Security:

Started Phone Security Analysis...
MCU Version V ICPR72_09w13.2
MCU Date 19-05-09
Product RM-247 (Nokia N96)
Manufacturer © Nokia
IMEI 12345610654321?
Reading Security Block...
Security block OK and saved to "RM-247_12345610654321_02102012_140556.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
-- SECURITY PROBLEM --

Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!
To repair it, simply slick "SX4 Authorization / SD Repair" button.
After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically)

Additionaly, Checking HWC/CCC Certs...
Booting CMT...
APE_SYSTEM_ASIC_ID: 008815D3
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: EB4B4B574E779BF342145433A1384499E3193253
APE_ROOT_KEY_HASH: 0BBC4203E2D3B82504C75CB65E906A35
APE_BOOT_ROM_CRC: 137A9A3B
APE_SECURE_ROM_CRC: 33259D2C
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0970010E43A1015888F0875F821A3BC01E1D0EB1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020880400006B21, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Searching for BootCode: DualLine 32Bit
FlashChip 0x00208804 (ST), Size: 8MBytes, VPP: 9V
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
Searching for BootCode: DualLine 32Bit
STn8815_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Adding FUR Client (APE, State: Start)...
APE FUR Ready!
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,APE]: 0x0000000000000000, Unknown, RAM
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,APE]: 0x002000B100000000, ST, ONENAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x002000B1 (ST), Size: 8MBytes, VPP: 21V
STn8815_STNFMS_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: N8815 ALG STNFMS
Initializing TurboCache...
TurboCache Loaded!
Writing APE KEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ALG Certificate...
APE Algorithm Ready!
Adding FUR Client (APE, State: Ready)...
APE FUR Ready!
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
Flashbus Write baud set to 5.0Mbits
HWC Looks OK!
CCC Looks OK!
Restarting MCU...
-- SECURITY PROBLEM --
Step 3 : Analyzing Security Block
"0970010E43A1015888F0875F821A3BC01E1D0EB1.B0000E00" Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
SIMLOCK FOUND AND CHECKSUM OK! PASSED!
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!

Que podria hacer para recuperar el cel?? Gracias de antemano

Qué tal mi hermano, debes escribirle los Backup del RPL, de los certificados y del PM, claro, todo esto debe estar respaldado con el imei original, ya que si tienes los respaldos después de que se daño el Imei no sirven de nada. Si no cuentas con los respaldos, contacta al señor cubano o a los señores de mobile experts por mensaje privado, ellos te pueden hacer un calculo de RPL así podrás recuperar el Imei original, saludos.

Hola brother
ok, voy a intentar ver si dispongo de algun respaldo de los que me comentas, pero te agradeceria si me pudieses indicar como lo hago y en que orden.
Un saludo y gracias

amigo solo dale en reestableser imei y te vuelve a la normalidad

Amigo viendo lo tu log de operacion te comento que tienes el RPL dañado y la unica manera de repararlo es comprando un nuevo RPL de un servidor. Consultale a Cubano o a Mobilexpert. Suerte!!!

Si el equipo le llegó en ese estado no podrá hacer nada ya que no cuenta con el respado de los archivos necesarios, solo le queda comprar el servicio de reparación RPL de la forma que le dijeron en el post anterior contacta a los administradores.

Mandale un mensaje privado:

http://www.clangsm.com/forum/index.php?showuser=1 CuBan0

http://www.clangsm.com/forum/index.php?showuser=9 Mobile Experts