Hola amigos: Me llego un nokia c3 con problema de soft; procedi a actuakizar soft con phoenix 2010, el hecho es que me da error cuando intenta iniciarlo y se queda ahi. ya probe la version 2011, desinstale, limpie el registro de windows, reinicie y hasta controle el cable pero sigue igual, le descargue la version original con la que venia el cel (08.63) y sigue muerto. Les agradezco cualquier ayuda amigos

Este es el Log:

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Loading secondary boot code: 14656 bytes
Secondary boot loaded
Loading update server code: 557974 bytes
Update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 48119 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
WARNING: Asic CMT: NAND status reported bad blocks
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Failed to set phone to flashmode
All operations completed
Product flashing failed.

Le Pusistes Una Version De Firmware Inferior A La Que Tenia Busca Una Version Mas Alta Con El Navifirm Y Te Aseguro Que Levanta De Una... Yo Utilizo La Version 08.65...
Si Puedes Carga La Bateria Con Un Cargador Universal La Bateria Baja Afecta...

Aqui Esta Tambien El El Navifirm Y El Firmware Que Utilizo Solo Lo Descomprimes Y Lo Pegas En Ruta C:\Archivos de programa\Nokia\Phoenix\Products
Desinstala El Que Tienes Primero...

Mensaje modificado por HackerCell el Jan 7 2012, 12:39 AM

procede asi
si es rm-614 utiliza la version 8.65 cualkiera de las primera k esta en el navi trae español
flashealo con refurbish con el ultimo crack del phoenix 2011 y enciende de vuelta en pantalla blanca y al toque da imagen!
y keda como nuevo.
salu2 cordiales

GRACIASSSSSSSSSSS AMIGO!!! Le puse la version y salio, pero creo que la bateria era el problema, lo cargue en otro c3, lo puse casi full (no me aguantaba las ganas de sacarlo ) y salio de una, muchas gracias amigos; doy por cerrado el tema. Fue problema de bateria.

Flashee este mismo modelo C3-00 con la version original 08.63 y nada, el equipo continua apagado, mas si lo reconoce al darle un toque al power, baje la flash del amigo HackerCell 08.65 y nada, al final del proceso con phoenix me tira error, con la mxkey corre toda la flash muy rapido, pero nada que levanta, ya hice lo de siempre (mantenimiento, cambio de bateria, etc) otra alternativa que les haya funcionado en realidad?

prueba con el firmware 8.70 que esta en el navifirm hay uno en español, con ese me levanto un c3

desinstala todo lo que tenga que ver con nokia (drivers, pc suite, etc)y limpia el registro de windows, reinicia e instala phoenix 2011 y desde el navifirm descarga la version 08.65 (esta entre las 5 primeras la la version LTA gray) y flasheas, a mi me salio uno que no queria salir cargando la bateria casi a full y salio de una. Espero te soluciones tu problema.saludos

Solucionado....


Es necesario descargar la versión mas reciente a la que tenia instalado tu equipo... para ello recomiendo NaviFirm después de eso el procedimiento tal cual como lo indicaban anteriormente. el log que me arroja es el siguiente.

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 14656 bytes
Secondary boot loaded
Loading update server code: 636228 bytes
Update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 50307 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
WARNING: Asic CMT: NAND status reported bad blocks
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Doing factorysets
Factorysets complete
Reading Dynamic Camera Configuration ID 1
Updating configuration of camera with ID 1
Dynamic Camera Configuration updating failed: 0x84167501 - AudioVisual: No configuration file matching the camera name string NI00BC0000040102F201 was found.
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.1
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ISSVariantActivator, version: 1.0
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 2 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Firmware updating succeeded.

Serias tan amable de poner el firm que utilizaste para revivir tu C3 en un servidor de archivos, lo que pasa es que como novato aun no puedo descargar archivos adjuntos y la verdad no cuento con dinero para poder comprarme la VIP es mucho su costo para mi.

De antemano gracias.

hola, googlealo y lo encontras seguro. yo uso navifirm plus, por ejemplo: navifirm 4shared. saludos

Mira yo estoy usando esta vercion Phoenix_Service_Software_2012.04.003.47798_Cracked.rar y no he tenido ningun problema, trabaja mucho mas estable y corrigieron algunos problemas, ademas que inchrementaron los modelos de telefonos.