Motorola Xt912 Como Progrmar Opciones

[lugame]

Hola compañeros me llego este equipo cdma pero no puedo progrmarlo, usa microsim de verizon y ya intente activarlo con estos metodos que encontre en la internet pero no sale alguna idea de como poder programarlo, o si alguien ya lo ha hecho............



Go into *#*#4636#*#* - Went into phone information (Set to CDMA Only PRL, DNS check allowed, Query CFU enabled).


QPST

Add the port for the device if required under QPST configuration. It's going to be the DIAG port. Just check device manager to see what port that is.

Use the Service Programming application under the QPST folder to access the phone. Connect to it but don't read.

Now follow this tutorial to write the proper information:

[Only registered and activated users can see links. ]

Write to the phone. Reboot it once all the writing is done and catch the boot to put it back in DIAG mode. If you don't it's no big deal, but you will have to power it down and get it back in DIAG mode before continuing.


CDMA WS

Open up CDMA WS and connect to the port with the RAZR. Go to the security tab and send the SPC 000000. Then go to the memory tab and send the DROID NV items which can be found at whiterabbit.org. It should write the NV items and fix the data.

ojala me puedan ayudar-..............saludos

[Anunciante Autorizado]

[Eliminado_customphone_*]

Alguien que sepa como activar estos nuevos equipos de micro sim4g lte .....
are una donacion para la persona que sea tan amable de ayudarnos a utilizar estos aparatos...